The Rails Initialization Process

This guide goes through every method call that is required to boot up the Ruby on Rails stack for a default Rails application, explaining each part in detail along the way. For this guide, we will be focusing on what happens when you execute bin/rails server to boot your app.

Paths in this guide are relative to Rails or a Rails application unless otherwise specified.

If you want to follow along while browsing the Rails source code, we recommend that you use the t key binding to open the file finder inside GitHub and find files quickly.

1 Launch!

Let's start to boot and initialize the app. A Rails application is usually started by running bin/rails console or bin/rails server.

1.1 `bin/rails`

This file is as follows:

#!/usr/bin/env ruby
APP_PATH = File.expand_path('../config/application', __dir__)
require_relative "../config/boot"
require "rails/commands"

The APP_PATH constant will be used later in rails/commands. The config/boot file referenced here is the config/boot.rb file in our application which is responsible for loading Bundler and setting it up.

1.2 `config/boot.rb`

config/boot.rb contains:

ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../Gemfile', __dir__)

require "bundler/setup" # Set up gems listed in the Gemfile.

In a standard Rails application, there's a Gemfile which declares all dependencies of the application. config/boot.rb sets ENV['BUNDLE_GEMFILE'] to the location of this file. If the Gemfile exists, then bundler/setup is required. The require is used by Bundler to configure the load path for your Gemfile's dependencies.

1.3 `rails/commands.rb`

Once config/boot.rb has finished, the next file that is required is rails/commands, which helps in expanding aliases. In the current case, the ARGV array simply contains server which will be passed over:

require "rails/command"

aliases = {
  "g"  => "generate",
  "d"  => "destroy",
  "c"  => "console",
  "s"  => "server",
  "db" => "dbconsole",
  "r"  => "runner",
  "t"  => "test"
}

command = ARGV.shift
command = aliases[command] || command

Rails::Command.invoke command, ARGV

If we had used s rather than server, Rails would have used the aliases defined here to find the matching command.

1.4 `rails/command.rb`

When one types a Rails command, invoke tries to lookup a command for the given namespace and executes the command if found.

If Rails doesn't recognize the command, it hands the reins over to Rake to run a task of the same name.

As shown, Rails::Command displays the help output automatically if the namespace is empty.

module Rails
  module Command
    class << self
      def invoke(full_namespace, args = [], **config)
        namespace = full_namespace = full_namespace.to_s

        if char = namespace =~ /:(\w+)$/
          command_name, namespace = $1, namespace.slice(0, char)
        else
          command_name = namespace
        end

        command_name, namespace = "help", "help" if command_name.blank? || HELP_MAPPINGS.include?(command_name)
        command_name, namespace = "version", "version" if %w( -v --version ).include?(command_name)

        command = find_by_namespace(namespace, command_name)
        if command && command.all_commands[command_name]
          command.perform(command_name, args, config)
        else
          find_by_namespace("rake").perform(full_namespace, args, config)
        end
      end
    end
  end
end

With the server command, Rails will further run the following code:

module Rails
  module Command
    class ServerCommand < Base # :nodoc:
      def perform
        extract_environment_option_from_argument
        set_application_directory!
        prepare_restart

        Rails::Server.new(server_options).tap do |server|
          # Require application after server sets environment to propagate
          # the --environment option.
          require APP_PATH
          Dir.chdir(Rails.application.root)

          if server.serveable?
            print_boot_information(server.server, server.served_url)
            after_stop_callback = -> { say "Exiting" unless options[:daemon] }
            server.start(after_stop_callback)
          else
            say rack_server_suggestion(using)
          end
        end
      end
    end
  end
end

This file will change into the Rails root directory (a path two directories up from APP_PATH which points at config/application.rb), but only if the config.ru file isn't found. This then starts up the Rails::Server class.

1.5 `actionpack/lib/action_dispatch.rb`

Action Dispatch is the routing component of the Rails framework. It adds functionality like routing, session, and common middlewares.

1.6 `rails/commands/server/server_command.rb`

The Rails::Server class is defined in this file by inheriting from Rack::Server. When Rails::Server.new is called, this calls the initialize method in rails/commands/server/server_command.rb:

module Rails
  class Server < ::Rack::Server
    def initialize(options = nil)
      @default_options = options || {}
      super(@default_options)
      set_environment
    end
  end
end

Firstly, super is called which calls the initialize method on Rack::Server.

1.7 Rack: `lib/rack/server.rb`

Rack::Server is responsible for providing a common server interface for all Rack-based applications, which Rails is now a part of.

The initialize method in Rack::Server simply sets several variables:

module Rack
  class Server
    def initialize(options = nil)
      @ignore_options = []

      if options
        @use_default_options = false
        @options = options
        @app = options[:app] if options[:app]
      else
        argv = defined?(SPEC_ARGV) ? SPEC_ARGV : ARGV
        @use_default_options = true
        @options = parse_options(argv)
      end
    end
  end
end

In this case, return value of Rails::Command::ServerCommand#server_options will be assigned to options. When lines inside if statement is evaluated, a couple of instance variables will be set.

server_options method in Rails::Command::ServerCommand is defined as follows:

module Rails
  module Command
    class ServerCommand
      no_commands do
        def server_options
          {
            user_supplied_options: user_supplied_options,
            server:                using,
            log_stdout:            log_to_stdout?,
            Port:                  port,
            Host:                  host,
            DoNotReverseLookup:    true,
            config:                options[:config],
            environment:           environment,
            daemonize:             options[:daemon],
            pid:                   pid,
            caching:               options[:dev_caching],
            restart_cmd:           restart_command,
            early_hints:           early_hints
          }
        end
      end
    end
  end
end

The value will be assigned to instance variable @options.

After super has finished in Rack::Server, we jump back to rails/commands/server/server_command.rb. At this point, set_environment is called within the context of the Rails::Server object.

module Rails
  module Server
    def set_environment
      ENV["RAILS_ENV"] ||= options[:environment]
    end
  end
end

After initialize has finished, we jump back into the server command where APP_PATH (which was set earlier) is required.

1.8 `config/application`

When require APP_PATH is executed, config/application.rb is loaded (recall that APP_PATH is defined in bin/rails). This file exists in your application and it's free for you to change based on your needs.

1.9 `Rails::Server#start`

After config/application is loaded, server.start is called. This method is defined like this:

module Rails
  class Server < ::Rack::Server
    def start(after_stop_callback = nil)
      trap(:INT) { exit }
      create_tmp_directories
      setup_dev_caching
      log_to_stdout if options[:log_stdout]

      super()
      # ...
    end

    private
      def setup_dev_caching
        if options[:environment] == "development"
          Rails::DevCaching.enable_by_argument(options[:caching])
        end
      end

      def create_tmp_directories
        %w(cache pids sockets).each do |dir_to_make|
          FileUtils.mkdir_p(File.join(Rails.root, "tmp", dir_to_make))
        end
      end

      def log_to_stdout
        wrapped_app # touch the app so the logger is set up

        console = ActiveSupport::Logger.new(STDOUT)
        console.formatter = Rails.logger.formatter
        console.level = Rails.logger.level

        unless ActiveSupport::Logger.logger_outputs_to?(Rails.logger, STDOUT)
          Rails.logger.extend(ActiveSupport::Logger.broadcast(console))
        end
      end
  end
end

This method creates a trap for INT signals, so if you CTRL-C the server, it will exit the process. As we can see from the code here, it will create the tmp/cache, tmp/pids, and tmp/sockets directories. It then enables caching in development if bin/rails server is called with --dev-caching. Finally, it calls wrapped_app which is responsible for creating the Rack app, before creating and assigning an instance of ActiveSupport::Logger.

The super method will call Rack::Server.start which begins its definition as follows:

module Rack
  class Server
    def start &blk
      if options[:warn]
        $-w = true
      end

      if includes = options[:include]
        $LOAD_PATH.unshift(*includes)
      end

      if library = options[:require]
        require library
      end

      if options[:debug]
        $DEBUG = true
        require "pp"
        p options[:server]
        pp wrapped_app
        pp app
      end

      check_pid! if options[:pid]

      # Touch the wrapped app, so that the config.ru is loaded before
      # daemonization (i.e. before chdir, etc).
      handle_profiling(options[:heapfile], options[:profile_mode], options[:profile_file]) do
        wrapped_app
      end

      daemonize_app if options[:daemonize]

      write_pid if options[:pid]

      trap(:INT) do
        if server.respond_to?(:shutdown)
          server.shutdown
        else
          exit
        end
      end

      server.run wrapped_app, options, &blk
    end
  end
end

The interesting part for a Rails app is the last line, server.run. Here we encounter the wrapped_app method again, which this time we're going to explore more (even though it was executed before, and thus memoized by now).

module Rack
  class Server
    def wrapped_app
      @wrapped_app ||= build_app app
    end
  end
end

The app method here is defined like so:

module Rack
  class Server
    def app
      @app ||= options[:builder] ? build_app_from_string : build_app_and_options_from_config
    end

    # ...

    private
      def build_app_and_options_from_config
        if !::File.exist? options[:config]
          abort "configuration #{options[:config]} not found"
        end

        app, options = Rack::Builder.parse_file(self.options[:config], opt_parser)
        @options.merge!(options) { |key, old, new| old }
        app
      end

      def build_app_from_string
        Rack::Builder.new_from_string(self.options[:builder])
      end

  end
end

The options[:config] value defaults to config.ru which contains this:

# This file is used by Rack-based servers to start the application.

require_relative "config/environment"

run Rails.application

The Rack::Builder.parse_file method here takes the content from this config.ru file and parses it using this code:

module Rack
  class Builder
    def self.load_file(path, opts = Server::Options.new)
      # ...
      app = new_from_string cfgfile, config
      # ...
    end

    # ...

    def self.new_from_string(builder_script, file="(rackup)")
      eval "Rack::Builder.new {\n" + builder_script + "\n}.to_app",
        TOPLEVEL_BINDING, file, 0
    end
  end
end

The initialize method of Rack::Builder will take the block here and execute it within an instance of Rack::Builder. This is where the majority of the initialization process of Rails happens. The require line for config/environment.rb in config.ru is the first to run:

require_relative "config/environment"

1.10 `config/environment.rb`

This file is the common file required by config.ru (bin/rails server) and Passenger. This is where these two ways to run the server meet; everything before this point has been Rack and Rails setup.

This file begins with requiring config/application.rb:

require_relative "application"

1.11 `config/application.rb`

This file requires config/boot.rb:

require_relative "boot"

But only if it hasn't been required before, which would be the case in bin/rails server but wouldn't be the case with Passenger.

Then the fun begins!

2 Loading Rails

The next line in config/application.rb is:

require "rails/all"

2.1 `railties/lib/rails/all.rb`

This file is responsible for requiring all the individual frameworks of Rails:

require "rails"

%w(
  active_record/railtie
  active_storage/engine
  action_controller/railtie
  action_view/railtie
  action_mailer/railtie
  active_job/railtie
  action_cable/engine
  action_mailbox/engine
  action_text/engine
  rails/test_unit/railtie
).each do |railtie|
  begin
    require railtie
  rescue LoadError
  end
end

This is where all the Rails frameworks are loaded and thus made available to the application. We won't go into detail of what happens inside each of those frameworks, but you're encouraged to try and explore them on your own.

For now, just keep in mind that common functionality like Rails engines, I18n and Rails configuration are all being defined here.

2.2 Back to `config/environment.rb`

The rest of config/application.rb defines the configuration for the Rails::Application which will be used once the application is fully initialized. When config/application.rb has finished loading Rails and defined the application namespace, we go back to config/environment.rb. Here, the application is initialized with Rails.application.initialize!, which is defined in rails/application.rb.

2.3 `railties/lib/rails/application.rb`

The initialize! method looks like this:

def initialize!(group = :default) # :nodoc:
  raise "Application has been already initialized." if @initialized
  run_initializers(group, self)
  @initialized = true
  self
end

You can only initialize an app once. The Railtie initializers are run through the run_initializers method which is defined in railties/lib/rails/initializable.rb:

def run_initializers(group = :default, *args)
  return if instance_variable_defined?(:@ran)
  initializers.tsort_each do |initializer|
    initializer.run(*args) if initializer.belongs_to?(group)
  end
  @ran = true
end

The run_initializers code itself is tricky. What Rails is doing here is traversing all the class ancestors looking for those that respond to an initializers method. It then sorts the ancestors by name, and runs them. For example, the Engine class will make all the engines available by providing an initializers method on them.

The Rails::Application class, as defined in railties/lib/rails/application.rb defines bootstrap, railtie, and finisher initializers. The bootstrap initializers prepare the application (like initializing the logger) while the finisher initializers (like building the middleware stack) are run last. The railtie initializers are the initializers which have been defined on the Rails::Application itself and are run between the bootstrap and finishers.

Note: Do not confuse Railtie initializers overall with the load_config_initializers initializer instance or its associated config initializers in config/initializers.

After this is done we go back to Rack::Server.

2.4 Rack: lib/rack/server.rb

Last time we left when the app method was being defined:

module Rack
  class Server
    def app
      @app ||= options[:builder] ? build_app_from_string : build_app_and_options_from_config
    end

    # ...

    private
      def build_app_and_options_from_config
        if !::File.exist? options[:config]
          abort "configuration #{options[:config]} not found"
        end

        app, options = Rack::Builder.parse_file(self.options[:config], opt_parser)
        @options.merge!(options) { |key, old, new| old }
        app
      end

      def build_app_from_string
        Rack::Builder.new_from_string(self.options[:builder])
      end

  end
end

At this point app is the Rails app itself (a middleware), and what happens next is Rack will call all the provided middlewares:

module Rack
  class Server
    private
      def build_app(app)
        middleware[options[:environment]].reverse_each do |middleware|
          middleware = middleware.call(self) if middleware.respond_to?(:call)
          next unless middleware
          klass, *args = middleware
          app = klass.new(app, *args)
        end
        app
      end
  end
end

Remember, build_app was called (by wrapped_app) in the last line of Rack::Server#start. Here's how it looked like when we left:

server.run wrapped_app, options, &blk

At this point, the implementation of server.run will depend on the server you're using. For example, if you were using Puma, here's what the run method would look like:

module Rack
  module Handler
    module Puma
      # ...
      def self.run(app, options = {})
        conf   = self.config(app, options)

        events = options.delete(:Silent) ? ::Puma::Events.strings : ::Puma::Events.stdio

        launcher = ::Puma::Launcher.new(conf, :events => events)

        yield launcher if block_given?
        begin
          launcher.run
        rescue Interrupt
          puts "* Gracefully stopping, waiting for requests to finish"
          launcher.stop
          puts "* Goodbye!"
        end
      end
      # ...
    end
  end
end

We won't dig into the server configuration itself, but this is the last piece of our journey in the Rails initialization process.

This high level overview will help you understand when your code is executed and how, and overall become a better Rails developer. If you still want to know more, the Rails source code itself is probably the best place to go next.

Feedback

You're encouraged to help improve the quality of this guide.

Please contribute if you see any typos or factual errors. To get started, you can read our documentation contributions section.

You may also find incomplete content or stuff that is not up to date. Please do add any missing documentation for main. Make sure to check Edge Guides first to verify if the issues are already fixed or not on the main branch. Check the Ruby on Rails Guides Guidelines for style and conventions.

If for whatever reason you spot something to fix but cannot patch it yourself, please open an issue.

And last but not least, any kind of discussion regarding Ruby on Rails documentation is very welcome on the official Ruby on Rails Forum.

Guides.rubyonrails.org

Chapters