v7.1.3.2
More at rubyonrails.org: More Ruby on Rails

Rails Internationalization (I18n) API

The Ruby I18n (shorthand for internationalization) gem which is shipped with Ruby on Rails (starting from Rails 2.2) provides an easy-to-use and extensible framework for translating your application to a single custom language other than English or for providing multi-language support in your application.

The process of "internationalization" usually means to abstract all strings and other locale specific bits (such as date or currency formats) out of your application. The process of "localization" means to provide translations and localized formats for these bits.1

So, in the process of internationalizing your Rails application you have to:

In the process of localizing your application you'll probably want to do the following three things:

This guide will walk you through the I18n API and contains a tutorial on how to internationalize a Rails application from the start.

After reading this guide, you will know:

The Ruby I18n framework provides you with all necessary means for internationalization/localization of your Rails application. You may also use various gems available to add additional functionality or features. See the rails-i18n gem for more information.

1 How I18n in Ruby on Rails Works

Internationalization is a complex problem. Natural languages differ in so many ways (e.g. in pluralization rules) that it is hard to provide tools for solving all problems at once. For that reason the Rails I18n API focuses on:

  • providing support for English and similar languages out of the box
  • making it easy to customize and extend everything for other languages

As part of this solution, every static string in the Rails framework - e.g. Active Record validation messages, time and date formats - has been internationalized. Localization of a Rails application means defining translated values for these strings in desired languages.

To localize, store, and update content in your application (e.g. translate blog posts), see the Translating model content section.

1.1 The Overall Architecture of the Library

Thus, the Ruby I18n gem is split into two parts:

  • The public API of the I18n framework - a Ruby module with public methods that define how the library works
  • A default backend (which is intentionally named Simple backend) that implements these methods

As a user you should always only access the public methods on the I18n module, but it is useful to know about the capabilities of the backend.

It is possible to swap the shipped Simple backend with a more powerful one, which would store translation data in a relational database, GetText dictionary, or similar. See section Using different backends below.

1.2 The Public I18n API

The most important methods of the I18n API are:

translate # Lookup text translations
localize  # Localize Date and Time objects to local formats

These have the aliases #t and #l so you can use them like this:

I18n.t 'store.title'
I18n.l Time.now

There are also attribute readers and writers for the following attributes:

load_path                 # Announce your custom translation files
locale                    # Get and set the current locale
default_locale            # Get and set the default locale
available_locales         # Permitted locales available for the application
enforce_available_locales # Enforce locale permission (true or false)
exception_handler         # Use a different exception_handler
backend                   # Use a different backend

So, let's internationalize a simple Rails application from the ground up in the next chapters!

2 Setup the Rails Application for Internationalization

There are a few steps to get up and running with I18n support for a Rails application.

2.1 Configure the I18n Module

Following the convention over configuration philosophy, Rails I18n provides reasonable default translation strings. When different translation strings are needed, they can be overridden.

Rails adds all .rb and .yml files from the config/locales directory to the translations load path, automatically.

The default en.yml locale in this directory contains a sample pair of translation strings:

en:
  hello: "Hello world"

This means, that in the :en locale, the key hello will map to the Hello world string. Every string inside Rails is internationalized in this way, see for instance Active Model validation messages in the activemodel/lib/active_model/locale/en.yml file or time and date formats in the activesupport/lib/active_support/locale/en.yml file. You can use YAML or standard Ruby Hashes to store translations in the default (Simple) backend.

The I18n library will use English as a default locale, i.e. if a different locale is not set, :en will be used for looking up translations.

The i18n library takes a pragmatic approach to locale keys (after some discussion), including only the locale ("language") part, like :en, :pl, not the region part, like :"en-US" or :"en-GB", which are traditionally used for separating "languages" and "regional setting" or "dialects". Many international applications use only the "language" element of a locale such as :cs, :th, or :es (for Czech, Thai, and Spanish). However, there are also regional differences within different language groups that may be important. For instance, in the :"en-US" locale you would have $ as a currency symbol, while in :"en-GB", you would have £. Nothing stops you from separating regional and other settings in this way: you just have to provide full "English - United Kingdom" locale in a :"en-GB" dictionary.

The translations load path (I18n.load_path) is an array of paths to files that will be loaded automatically. Configuring this path allows for customization of translations directory structure and file naming scheme.

The backend lazy-loads these translations when a translation is looked up for the first time. This backend can be swapped with something else even after translations have already been announced.

You can change the default locale as well as configure the translations load paths in config/application.rb as follows:

config.i18n.load_path += Dir[Rails.root.join('my', 'locales', '*.{rb,yml}')]
config.i18n.default_locale = :de

The load path must be specified before any translations are looked up. To change the default locale from an initializer instead of config/application.rb:

# config/initializers/locale.rb

# Where the I18n library should search for translation files
I18n.load_path += Dir[Rails.root.join('lib', 'locale', '*.{rb,yml}')]

# Permitted locales available for the application
I18n.available_locales = [:en, :pt]

# Set default locale to something other than :en
I18n.default_locale = :pt

Note that appending directly to I18n.load_path instead of to the application's configured I18n will not override translations from external gems.

2.2 Managing the Locale across Requests

A localized application will likely need to provide support for multiple locales. To accomplish this, the locale should be set at the beginning of each request so that all strings are translated using the desired locale during the lifetime of that request.

The default locale is used for all translations unless I18n.locale= or I18n.with_locale is used.

I18n.locale can leak into subsequent requests served by the same thread/process if it is not consistently set in every controller. For example executing I18n.locale = :es in one POST requests will have effects for all later requests to controllers that don't set the locale, but only in that particular thread/process. For that reason, instead of I18n.locale = you can use I18n.with_locale which does not have this leak issue.

The locale can be set in an around_action in the ApplicationController:

around_action :switch_locale

def switch_locale(&action)
  locale = params[:locale] || I18n.default_locale
  I18n.with_locale(locale, &action)
end

This example illustrates this using a URL query parameter to set the locale (e.g. http://example.com/books?locale=pt). With this approach, http://localhost:3000?locale=pt renders the Portuguese localization, while http://localhost:3000?locale=de loads a German localization.

The locale can be set using one of many different approaches.

2.2.1 Setting the Locale from the Domain Name

One option you have is to set the locale from the domain name where your application runs. For example, we want www.example.com to load the English (or default) locale, and www.example.es to load the Spanish locale. Thus the top-level domain name is used for locale setting. This has several advantages:

  • The locale is an obvious part of the URL.
  • People intuitively grasp in which language the content will be displayed.
  • It is very trivial to implement in Rails.
  • Search engines seem to like that content in different languages lives at different, inter-linked domains.

You can implement it like this in your ApplicationController:

around_action :switch_locale

def switch_locale(&action)
  locale = extract_locale_from_tld || I18n.default_locale
  I18n.with_locale(locale, &action)
end

# Get locale from top-level domain or return +nil+ if such locale is not available
# You have to put something like:
#   127.0.0.1 application.com
#   127.0.0.1 application.it
#   127.0.0.1 application.pl
# in your /etc/hosts file to try this out locally
def extract_locale_from_tld
  parsed_locale = request.host.split('.').last
  I18n.available_locales.map(&:to_s).include?(parsed_locale) ? parsed_locale : nil
end

We can also set the locale from the subdomain in a very similar way:

# Get locale code from request subdomain (like http://it.application.local:3000)
# You have to put something like:
#   127.0.0.1 gr.application.local
# in your /etc/hosts file to try this out locally
def extract_locale_from_subdomain
  parsed_locale = request.subdomains.first
  I18n.available_locales.map(&:to_s).include?(parsed_locale) ? parsed_locale : nil
end

If your application includes a locale switching menu, you would then have something like this in it:

link_to("Deutsch", "#{APP_CONFIG[:deutsch_website_url]}#{request.env['PATH_INFO']}")

assuming you would set APP_CONFIG[:deutsch_website_url] to some value like http://www.application.de.

This solution has aforementioned advantages, however, you may not be able or may not want to provide different localizations ("language versions") on different domains. The most obvious solution would be to include locale code in the URL params (or request path).

2.2.2 Setting the Locale from URL Params

The most usual way of setting (and passing) the locale would be to include it in URL params, as we did in the I18n.with_locale(params[:locale], &action) around_action in the first example. We would like to have URLs like www.example.com/books?locale=ja or www.example.com/ja/books in this case.

This approach has almost the same set of advantages as setting the locale from the domain name: namely that it's RESTful and in accord with the rest of the World Wide Web. It does require a little bit more work to implement, though.

Getting the locale from params and setting it accordingly is not hard; including it in every URL and thus passing it through the requests is. To include an explicit option in every URL, e.g. link_to(books_url(locale: I18n.locale)), would be tedious and probably impossible, of course.

Rails contains infrastructure for "centralizing dynamic decisions about the URLs" in its ApplicationController#default_url_options, which is useful precisely in this scenario: it enables us to set "defaults" for url_for and helper methods dependent on it (by implementing/overriding default_url_options).

We can include something like this in our ApplicationController then:

# app/controllers/application_controller.rb
def default_url_options
  { locale: I18n.locale }
end

Every helper method dependent on url_for (e.g. helpers for named routes like root_path or root_url, resource routes like books_path or books_url, etc.) will now automatically include the locale in the query string, like this: http://localhost:3001/?locale=ja.

You may be satisfied with this. It does impact the readability of URLs, though, when the locale "hangs" at the end of every URL in your application. Moreover, from the architectural standpoint, locale is usually hierarchically above the other parts of the application domain: and URLs should reflect this.

You probably want URLs to look like this: http://www.example.com/en/books (which loads the English locale) and http://www.example.com/nl/books (which loads the Dutch locale). This is achievable with the "over-riding default_url_options" strategy from above: you just have to set up your routes with scope:

# config/routes.rb
scope "/:locale" do
  resources :books
end

Now, when you call the books_path method you should get "/en/books" (for the default locale). A URL like http://localhost:3001/nl/books should load the Dutch locale, then, and following calls to books_path should return "/nl/books" (because the locale changed).

Since the return value of default_url_options is cached per request, the URLs in a locale selector cannot be generated invoking helpers in a loop that sets the corresponding I18n.locale in each iteration. Instead, leave I18n.locale untouched, and pass an explicit :locale option to the helper, or edit request.original_fullpath.

If you don't want to force the use of a locale in your routes you can use an optional path scope (denoted by the parentheses) like so:

# config/routes.rb
scope "(:locale)", locale: /en|nl/ do
  resources :books
end

With this approach you will not get a Routing Error when accessing your resources such as http://localhost:3001/books without a locale. This is useful for when you want to use the default locale when one is not specified.

Of course, you need to take special care of the root URL (usually "homepage" or "dashboard") of your application. A URL like http://localhost:3001/nl will not work automatically, because the root to: "dashboard#index" declaration in your routes.rb doesn't take locale into account. (And rightly so: there's only one "root" URL.)

You would probably need to map URLs like these:

# config/routes.rb
get '/:locale' => 'dashboard#index'

Do take special care about the order of your routes, so this route declaration does not "eat" other ones. (You may want to add it directly before the root :to declaration.)

Have a look at various gems which simplify working with routes: routing_filter, route_translator.

2.2.3 Setting the Locale from User Preferences

An application with authenticated users may allow users to set a locale preference through the application's interface. With this approach, a user's selected locale preference is persisted in the database and used to set the locale for authenticated requests by that user.

around_action :switch_locale

def switch_locale(&action)
  locale = current_user.try(:locale) || I18n.default_locale
  I18n.with_locale(locale, &action)
end

2.2.4 Choosing an Implied Locale

When an explicit locale has not been set for a request (e.g. via one of the above methods), an application should attempt to infer the desired locale.

2.2.4.1 Inferring Locale from the Language Header

The Accept-Language HTTP header indicates the preferred language for request's response. Browsers set this header value based on the user's language preference settings, making it a good first choice when inferring a locale.

A trivial implementation of using an Accept-Language header would be:

def switch_locale(&action)
  logger.debug "* Accept-Language: #{request.env['HTTP_ACCEPT_LANGUAGE']}"
  locale = extract_locale_from_accept_language_header
  logger.debug "* Locale set to '#{locale}'"
  I18n.with_locale(locale, &action)
end

private
  def extract_locale_from_accept_language_header
    request.env['HTTP_ACCEPT_LANGUAGE'].scan(/^[a-z]{2}/).first
  end

In practice, more robust code is necessary to do this reliably. Iain Hecker's http_accept_language library or Ryan Tomayko's locale Rack middleware provide solutions to this problem.

2.2.4.2 Inferring the Locale from IP Geolocation

The IP address of the client making the request can be used to infer the client's region and thus their locale. Services such as GeoLite2 Country or gems like geocoder can be used to implement this approach.

In general, this approach is far less reliable than using the language header and is not recommended for most web applications.

2.2.5 Storing the Locale from the Session or Cookies

You may be tempted to store the chosen locale in a session or a cookie. However, do not do this. The locale should be transparent and a part of the URL. This way you won't break people's basic assumptions about the web itself: if you send a URL to a friend, they should see the same page and content as you. A fancy word for this would be that you're being RESTful. Read more about the RESTful approach in Stefan Tilkov's articles. Sometimes there are exceptions to this rule and those are discussed below.

3 Internationalization and Localization

OK! Now you've initialized I18n support for your Ruby on Rails application and told it which locale to use and how to preserve it between requests.

Next we need to internationalize our application by abstracting every locale-specific element. Finally, we need to localize it by providing necessary translations for these abstracts.

Given the following example:

# config/routes.rb
Rails.application.routes.draw do
  root to: "home#index"
end
# app/controllers/application_controller.rb
class ApplicationController < ActionController::Base
  around_action :switch_locale

  def switch_locale(&action)
    locale = params[:locale] || I18n.default_locale
    I18n.with_locale(locale, &action)
  end
end
# app/controllers/home_controller.rb
class HomeController < ApplicationController
  def index
    flash[:notice] = "Hello Flash"
  end
end
<!-- app/views/home/index.html.erb -->
<h1>Hello World</h1>
<p><%= flash[:notice] %></p>

rails i18n demo untranslated

3.1 Abstracting Localized Code

In our code, there are two strings written in English that will be rendered in our response ("Hello Flash" and "Hello World"). To internationalize this code, these strings need to be replaced by calls to Rails' #t helper with an appropriate key for each string:

# app/controllers/home_controller.rb
class HomeController < ApplicationController
  def index
    flash[:notice] = t(:hello_flash)
  end
end
<!-- app/views/home/index.html.erb -->
<h1><%= t :hello_world %></h1>
<p><%= flash[:notice] %></p>

Now, when this view is rendered, it will show an error message which tells you that the translations for the keys :hello_world and :hello_flash are missing.

rails i18n demo translation missing

Rails adds a t (translate) helper method to your views so that you do not need to spell out I18n.t all the time. Additionally this helper will catch missing translations and wrap the resulting error message into a <span class="translation_missing">.

3.2 Providing Translations for Internationalized Strings

Add the missing translations into the translation dictionary files:

# config/locales/en.yml
en:
  hello_world: Hello world!
  hello_flash: Hello flash!
# config/locales/pirate.yml
pirate:
  hello_world: Ahoy World
  hello_flash: Ahoy Flash

Because the default_locale hasn't changed, translations use the :en locale and the response renders the english strings:

rails i18n demo translated to English

If the locale is set via the URL to the pirate locale (http://localhost:3000?locale=pirate), the response renders the pirate strings:

rails i18n demo translated to pirate

You need to restart the server when you add new locale files.

You may use YAML (.yml) or plain Ruby (.rb) files for storing your translations in SimpleStore. YAML is the preferred option among Rails developers. However, it has one big disadvantage. YAML is very sensitive to whitespace and special characters, so the application may not load your dictionary properly. Ruby files will crash your application on first request, so you may easily find what's wrong. (If you encounter any "weird issues" with YAML dictionaries, try putting the relevant portion of your dictionary into a Ruby file.)

If your translations are stored in YAML files, certain keys must be escaped. They are:

  • true, on, yes
  • false, off, no

Examples:

# config/locales/en.yml
en:
  success:
    'true':  'True!'
    'on':    'On!'
    'false': 'False!'
  failure:
    true:    'True!'
    off:     'Off!'
    false:   'False!'
I18n.t 'success.true'  # => 'True!'
I18n.t 'success.on'    # => 'On!'
I18n.t 'success.false' # => 'False!'
I18n.t 'failure.false' # => Translation Missing
I18n.t 'failure.off'   # => Translation Missing
I18n.t 'failure.true'  # => Translation Missing

3.3 Passing Variables to Translations

One key consideration for successfully internationalizing an application is to avoid making incorrect assumptions about grammar rules when abstracting localized code. Grammar rules that seem fundamental in one locale may not hold true in another one.

Improper abstraction is shown in the following example, where assumptions are made about the ordering of the different parts of the translation. Note that Rails provides a number_to_currency helper to handle the following case.

<!-- app/views/products/show.html.erb -->
<%= "#{t('currency')}#{@product.price}" %>
# config/locales/en.yml
en:
  currency: "$"
# config/locales/es.yml
es:
  currency: "€"

If the product's price is 10 then the proper translation for Spanish is "10 €" instead of "€10" but the abstraction cannot give it.

To create proper abstraction, the I18n gem ships with a feature called variable interpolation that allows you to use variables in translation definitions and pass the values for these variables to the translation method.

Proper abstraction is shown in the following example:

<!-- app/views/products/show.html.erb -->
<%= t('product_price', price: @product.price) %>
# config/locales/en.yml
en:
  product_price: "$%{price}"
# config/locales/es.yml
es:
  product_price: "%{price} €"

All grammatical and punctuation decisions are made in the definition itself, so the abstraction can give a proper translation.

The default and scope keywords are reserved and can't be used as variable names. If used, an I18n::ReservedInterpolationKey exception is raised. If a translation expects an interpolation variable, but this has not been passed to #translate, an I18n::MissingInterpolationArgument exception is raised.

3.4 Adding Date/Time Formats

OK! Now let's add a timestamp to the view, so we can demo the date/time localization feature as well. To localize the time format you pass the Time object to I18n.l or (preferably) use Rails' #l helper. You can pick a format by passing the :format option - by default the :default format is used.

<!-- app/views/home/index.html.erb -->
<h1><%= t :hello_world %></h1>
<p><%= flash[:notice] %></p>
<p><%= l Time.now, format: :short %></p>

And in our pirate translations file let's add a time format (it's already there in Rails' defaults for English):

# config/locales/pirate.yml
pirate:
  time:
    formats:
      short: "arrrround %H'ish"

So that would give you:

rails i18n demo localized time to pirate

Right now you might need to add some more date/time formats in order to make the I18n backend work as expected (at least for the 'pirate' locale). Of course, there's a great chance that somebody already did all the work by translating Rails' defaults for your locale. See the rails-i18n repository at GitHub for an archive of various locale files. When you put such file(s) in config/locales/ directory, they will automatically be ready for use.

3.5 Inflection Rules for Other Locales

Rails allows you to define inflection rules (such as rules for singularization and pluralization) for locales other than English. In config/initializers/inflections.rb, you can define these rules for multiple locales. The initializer contains a default example for specifying additional rules for English; follow that format for other locales as you see fit.

3.6 Localized Views

Let's say you have a BooksController in your application. Your index action renders content in app/views/books/index.html.erb template. When you put a localized variant of this template: index.es.html.erb in the same directory, Rails will render content in this template, when the locale is set to :es. When the locale is set to the default locale, the generic index.html.erb view will be used. (Future Rails versions may well bring this automagic localization to assets in public, etc.)

You can make use of this feature, e.g. when working with a large amount of static content, which would be clumsy to put inside YAML or Ruby dictionaries. Bear in mind, though, that any change you would like to do later to the template must be propagated to all of them.

3.7 Organization of Locale Files

When you are using the default SimpleStore shipped with the i18n library, dictionaries are stored in plain-text files on the disk. Putting translations for all parts of your application in one file per locale could be hard to manage. You can store these files in a hierarchy which makes sense to you.

For example, your config/locales directory could look like this:

|-defaults
|---es.yml
|---en.yml
|-models
|---book
|-----es.yml
|-----en.yml
|-views
|---defaults
|-----es.yml
|-----en.yml
|---books
|-----es.yml
|-----en.yml
|---users
|-----es.yml
|-----en.yml
|---navigation
|-----es.yml
|-----en.yml

This way, you can separate model and model attribute names from text inside views, and all of this from the "defaults" (e.g. date and time formats). Other stores for the i18n library could provide different means of such separation.

The default locale loading mechanism in Rails does not load locale files in nested dictionaries, like we have here. So, for this to work, we must explicitly tell Rails to look further:

# config/application.rb
config.i18n.load_path += Dir[Rails.root.join('config', 'locales', '**', '*.{rb,yml}')]

4 Overview of the I18n API Features

You should have a good understanding of using the i18n library now and know how to internationalize a basic Rails application. In the following chapters, we'll cover its features in more depth.

These chapters will show examples using both the I18n.translate method as well as the translate view helper method (noting the additional features provided by the view helper method).

Covered are features like these:

  • looking up translations
  • interpolating data into translations
  • pluralizing translations
  • using safe HTML translations (view helper method only)
  • localizing dates, numbers, currency, etc.

4.1 Looking up Translations

4.1.1 Basic Lookup, Scopes, and Nested Keys

Translations are looked up by keys which can be both Symbols or Strings, so these calls are equivalent:

I18n.t :message
I18n.t 'message'

The translate method also takes a :scope option which can contain one or more additional keys that will be used to specify a "namespace" or scope for a translation key:

I18n.t :record_invalid, scope: [:activerecord, :errors, :messages]

This looks up the :record_invalid message in the Active Record error messages.

Additionally, both the key and scopes can be specified as dot-separated keys as in:

I18n.translate "activerecord.errors.messages.record_invalid"

Thus the following calls are equivalent:

I18n.t 'activerecord.errors.messages.record_invalid'
I18n.t 'errors.messages.record_invalid', scope: :activerecord
I18n.t :record_invalid, scope: 'activerecord.errors.messages'
I18n.t :record_invalid, scope: [:activerecord, :errors, :messages]

4.1.2 Defaults

When a :default option is given, its value will be returned if the translation is missing:

I18n.t :missing, default: 'Not here'
# => 'Not here'

If the :default value is a Symbol, it will be used as a key and translated. One can provide multiple values as default. The first one that results in a value will be returned.

E.g., the following first tries to translate the key :missing and then the key :also_missing. As both do not yield a result, the string "Not here" will be returned:

I18n.t :missing, default: [:also_missing, 'Not here']
# => 'Not here'

4.1.3 Bulk and Namespace Lookup

To look up multiple translations at once, an array of keys can be passed:

I18n.t [:odd, :even], scope: 'errors.messages'
# => ["must be odd", "must be even"]

Also, a key can translate to a (potentially nested) hash of grouped translations. E.g., one can receive all Active Record error messages as a Hash with:

I18n.t 'errors.messages'
# => {:inclusion=>"is not included in the list", :exclusion=> ... }

If you want to perform interpolation on a bulk hash of translations, you need to pass deep_interpolation: true as a parameter. When you have the following dictionary:

en:
  welcome:
    title: "Welcome!"
    content: "Welcome to the %{app_name}"

then the nested interpolation will be ignored without the setting:

I18n.t 'welcome', app_name: 'book store'
# => {:title=>"Welcome!", :content=>"Welcome to the %{app_name}"}

I18n.t 'welcome', deep_interpolation: true, app_name: 'book store'
# => {:title=>"Welcome!", :content=>"Welcome to the book store"}

4.1.4 "Lazy" Lookup

Rails implements a convenient way to look up the locale inside views. When you have the following dictionary:

es:
  books:
    index:
      title: "Título"

you can look up the books.index.title value inside app/views/books/index.html.erb template like this (note the dot):

<%= t '.title' %>

Automatic translation scoping by partial is only available from the translate view helper method.

"Lazy" lookup can also be used in controllers:

en:
  books:
    create:
      success: Book created!

This is useful for setting flash messages for instance:

class BooksController < ApplicationController
  def create
    # ...
    redirect_to books_url, notice: t('.success')
  end
end

4.2 Pluralization

In many languages — including English — there are only two forms, a singular and a plural, for a given string, e.g. "1 message" and "2 messages". Other languages (Arabic, Japanese, Russian and many more) have different grammars that have additional or fewer plural forms. Thus, the I18n API provides a flexible pluralization feature.

The :count interpolation variable has a special role in that it both is interpolated to the translation and used to pick a pluralization from the translations according to the pluralization rules defined in the pluralization backend. By default, only the English pluralization rules are applied.

I18n.backend.store_translations :en, inbox: {
  zero: 'no messages', # optional
  one: 'one message',
  other: '%{count} messages'
}
I18n.translate :inbox, count: 2
# => '2 messages'

I18n.translate :inbox, count: 1
# => 'one message'

I18n.translate :inbox, count: 0
# => 'no messages'

The algorithm for pluralizations in :en is as simple as:

lookup_key = :zero if count == 0 && entry.has_key?(:zero)
lookup_key ||= count == 1 ? :one : :other
entry[lookup_key]

The translation denoted as :one is regarded as singular, and the :other is used as plural. If the count is zero, and a :zero entry is present, then it will be used instead of :other.

If the lookup for the key does not return a Hash suitable for pluralization, an I18n::InvalidPluralizationData exception is raised.

4.2.1 Locale-specific Rules

The I18n gem provides a Pluralization backend that can be used to enable locale-specific rules. Include it to the Simple backend, then add the localized pluralization algorithms to translation store, as i18n.plural.rule.

I18n::Backend::Simple.include(I18n::Backend::Pluralization)
I18n.backend.store_translations :pt, i18n: { plural: { rule: lambda { |n| [0, 1].include?(n) ? :one : :other } } }
I18n.backend.store_translations :pt, apples: { one: 'one or none', other: 'more than one' }

I18n.t :apples, count: 0, locale: :pt
# => 'one or none'

Alternatively, the separate gem rails-i18n can be used to provide a fuller set of locale-specific pluralization rules.

4.3 Setting and Passing a Locale

The locale can be either set pseudo-globally to I18n.locale (which uses Thread.current in the same way as, for example, Time.zone) or can be passed as an option to #translate and #localize.

If no locale is passed, I18n.locale is used:

I18n.locale = :de
I18n.t :foo
I18n.l Time.now

Explicitly passing a locale:

I18n.t :foo, locale: :de
I18n.l Time.now, locale: :de

The I18n.locale defaults to I18n.default_locale which defaults to :en. The default locale can be set like this:

I18n.default_locale = :de

4.4 Using Safe HTML Translations

Keys with a '_html' suffix and keys named 'html' are marked as HTML safe. When you use them in views the HTML will not be escaped.

# config/locales/en.yml
en:
  welcome: <b>welcome!</b>
  hello_html: <b>hello!</b>
  title:
    html: <b>title!</b>
<!-- app/views/home/index.html.erb -->
<div><%= t('welcome') %></div>
<div><%= raw t('welcome') %></div>
<div><%= t('hello_html') %></div>
<div><%= t('title.html') %></div>

Interpolation escapes as needed though. For example, given:

en:
  welcome_html: "<b>Welcome %{username}!</b>"

you can safely pass the username as set by the user:

<%# This is safe, it is going to be escaped if needed. %>
<%= t('welcome_html', username: @current_user.username) %>

Safe strings on the other hand are interpolated verbatim.

Automatic conversion to HTML safe translate text is only available from the translate (or t) helper method. This works in views and controllers.

i18n demo HTML safe

4.5 Translations for Active Record Models

You can use the methods Model.model_name.human and Model.human_attribute_name(attribute) to transparently look up translations for your model and attribute names.

For example when you add the following translations:

en:
  activerecord:
    models:
      user: Customer
    attributes:
      user:
        login: "Handle"
      # will translate User attribute "login" as "Handle"

Then User.model_name.human will return "Customer" and User.human_attribute_name("login") will return "Handle".

You can also set a plural form for model names, adding as following:

en:
  activerecord:
    models:
      user:
        one: Customer
        other: Customers

Then User.model_name.human(count: 2) will return "Customers". With count: 1 or without params will return "Customer".

In the event you need to access nested attributes within a given model, you should nest these under model/attribute at the model level of your translation file:

en:
  activerecord:
    attributes:
      user/role:
        admin: "Admin"
        contributor: "Contributor"

Then User.human_attribute_name("role.admin") will return "Admin".

If you are using a class which includes ActiveModel and does not inherit from ActiveRecord::Base, replace activerecord with activemodel in the above key paths.

4.5.1 Error Message Scopes

Active Record validation error messages can also be translated easily. Active Record gives you a couple of namespaces where you can place your message translations in order to provide different messages and translation for certain models, attributes, and/or validations. It also transparently takes single table inheritance into account.

This gives you quite powerful means to flexibly adjust your messages to your application's needs.

Consider a User model with a validation for the name attribute like this:

class User < ApplicationRecord
  validates :name, presence: true
end

The key for the error message in this case is :blank. Active Record will look up this key in the namespaces:

activerecord.errors.models.[model_name].attributes.[attribute_name]
activerecord.errors.models.[model_name]
activerecord.errors.messages
errors.attributes.[attribute_name]
errors.messages

Thus, in our example it will try the following keys in this order and return the first result:

activerecord.errors.models.user.attributes.name.blank
activerecord.errors.models.user.blank
activerecord.errors.messages.blank
errors.attributes.name.blank
errors.messages.blank

When your models are additionally using inheritance then the messages are looked up in the inheritance chain.

For example, you might have an Admin model inheriting from User:

class Admin < User
  validates :name, presence: true
end

Then Active Record will look for messages in this order:

activerecord.errors.models.admin.attributes.name.blank
activerecord.errors.models.admin.blank
activerecord.errors.models.user.attributes.name.blank
activerecord.errors.models.user.blank
activerecord.errors.messages.blank
errors.attributes.name.blank
errors.messages.blank

This way you can provide special translations for various error messages at different points in your model's inheritance chain and in the attributes, models, or default scopes.

4.5.2 Error Message Interpolation

The translated model name, translated attribute name, and value are always available for interpolation as model, attribute and value respectively.

So, for example, instead of the default error message "cannot be blank" you could use the attribute name like this : "Please fill in your %{attribute}".

  • count, where available, can be used for pluralization if present:
validation with option message interpolation
confirmation - :confirmation attribute
acceptance - :accepted -
presence - :blank -
absence - :present -
length :within, :in :too_short count
length :within, :in :too_long count
length :is :wrong_length count
length :minimum :too_short count
length :maximum :too_long count
uniqueness - :taken -
format - :invalid -
inclusion - :inclusion -
exclusion - :exclusion -
associated - :invalid -
non-optional association - :required -
numericality - :not_a_number -
numericality :greater_than :greater_than count
numericality :greater_than_or_equal_to :greater_than_or_equal_to count
numericality :equal_to :equal_to count
numericality :less_than :less_than count
numericality :less_than_or_equal_to :less_than_or_equal_to count
numericality :other_than :other_than count
numericality :only_integer :not_an_integer -
numericality :in :in count
numericality :odd :odd -
numericality :even :even -
comparison :greater_than :greater_than count
comparison :greater_than_or_equal_to :greater_than_or_equal_to count
comparison :equal_to :equal_to count
comparison :less_than :less_than count
comparison :less_than_or_equal_to :less_than_or_equal_to count
comparison :other_than :other_than count

4.6 Translations for Action Mailer E-Mail Subjects

If you don't pass a subject to the mail method, Action Mailer will try to find it in your translations. The performed lookup will use the pattern <mailer_scope>.<action_name>.subject to construct the key.

# user_mailer.rb
class UserMailer < ActionMailer::Base
  def welcome(user)
    #...
  end
end
en:
  user_mailer:
    welcome:
      subject: "Welcome to Rails Guides!"

To send parameters to interpolation use the default_i18n_subject method on the mailer.

# user_mailer.rb
class UserMailer < ActionMailer::Base
  def welcome(user)
    mail(to: user.email, subject: default_i18n_subject(user: user.name))
  end
end
en:
  user_mailer:
    welcome:
      subject: "%{user}, welcome to Rails Guides!"

4.7 Overview of Other Built-In Methods that Provide I18n Support

Rails uses fixed strings and other localizations, such as format strings and other format information in a couple of helpers. Here's a brief overview.

4.7.1 Action View Helper Methods

  • distance_of_time_in_words translates and pluralizes its result and interpolates the number of seconds, minutes, hours, and so on. See datetime.distance_in_words translations.

  • datetime_select and select_month use translated month names for populating the resulting select tag. See date.month_names for translations. datetime_select also looks up the order option from date.order (unless you pass the option explicitly). All date selection helpers translate the prompt using the translations in the datetime.prompts scope if applicable.

  • The number_to_currency, number_with_precision, number_to_percentage, number_with_delimiter, and number_to_human_size helpers use the number format settings located in the number scope.

4.7.2 Active Model Methods

  • model_name.human and human_attribute_name use translations for model names and attribute names if available in the activerecord.models scope. They also support translations for inherited class names (e.g. for use with STI) as explained above in "Error message scopes".

  • ActiveModel::Errors#generate_message (which is used by Active Model validations but may also be used manually) uses model_name.human and human_attribute_name (see above). It also translates the error message and supports translations for inherited class names as explained above in "Error message scopes".

  • ActiveModel::Error#full_message and ActiveModel::Errors#full_messages prepend the attribute name to the error message using a format looked up from errors.format (default: "%{attribute} %{message}"). To customize the default format, override it in the app's locale files. To customize the format per model or per attribute, see config.active_model.i18n_customize_full_message.

4.7.3 Active Support Methods

  • Array#to_sentence uses format settings as given in the support.array scope.

5 How to Store your Custom Translations

The Simple backend shipped with Active Support allows you to store translations in both plain Ruby and YAML format.2

For example a Ruby Hash providing translations can look like this:

{
  pt: {
    foo: {
      bar: "baz"
    }
  }
}

The equivalent YAML file would look like this:

pt:
  foo:
    bar: baz

As you see, in both cases the top level key is the locale. :foo is a namespace key and :bar is the key for the translation "baz".

Here is a "real" example from the Active Support en.yml translations YAML file:

en:
  date:
    formats:
      default: "%Y-%m-%d"
      short: "%b %d"
      long: "%B %d, %Y"

So, all of the following equivalent lookups will return the :short date format "%b %d":

I18n.t 'date.formats.short'
I18n.t 'formats.short', scope: :date
I18n.t :short, scope: 'date.formats'
I18n.t :short, scope: [:date, :formats]

Generally we recommend using YAML as a format for storing translations. There are cases, though, where you want to store Ruby lambdas as part of your locale data, e.g. for special date formats.

6 Customize Your I18n Setup

6.1 Using Different Backends

For several reasons the Simple backend shipped with Active Support only does the "simplest thing that could possibly work" for Ruby on Rails3 ... which means that it is only guaranteed to work for English and, as a side effect, languages that are very similar to English. Also, the simple backend is only capable of reading translations but cannot dynamically store them to any format.

That does not mean you're stuck with these limitations, though. The Ruby I18n gem makes it very easy to exchange the Simple backend implementation with something else that fits better for your needs, by passing a backend instance to the I18n.backend= setter.

For example, you can replace the Simple backend with the Chain backend to chain multiple backends together. This is useful when you want to use standard translations with a Simple backend but store custom application translations in a database or other backends.

With the Chain backend, you could use the Active Record backend and fall back to the (default) Simple backend:

I18n.backend = I18n::Backend::Chain.new(I18n::Backend::ActiveRecord.new, I18n.backend)

6.2 Using Different Exception Handlers

The I18n API defines the following exceptions that will be raised by backends when the corresponding unexpected conditions occur:

Exception Reason
I18n::MissingTranslationData no translation was found for the requested key
I18n::InvalidLocale the locale set to I18n.locale is invalid (e.g. nil)
I18n::InvalidPluralizationData a count option was passed but the translation data is not suitable for pluralization
I18n::MissingInterpolationArgument the translation expects an interpolation argument that has not been passed
I18n::ReservedInterpolationKey the translation contains a reserved interpolation variable name (i.e. one of: scope, default)
I18n::UnknownFileType the backend does not know how to handle a file type that was added to I18n.load_path

6.2.1 Customizing how I18n::MissingTranslationData is handled

If config.i18n.raise_on_missing_translations is true, I18n::MissingTranslationData errors will be raised. It's a good idea to turn this on in your test environment, so you can catch places where missing translations are requested.

If config.i18n.raise_on_missing_translations is false (the default in all environments), the exception's error message will be printed. This contains the missing key/scope so you can fix your code.

If you want to customize this behaviour further, you should set config.i18n.raise_on_missing_translations = false and then implement a I18n.exception_handler. The custom exception handler can be a proc or a class with a call method:

# config/initializers/i18n.rb
module I18n
  class RaiseExceptForSpecificKeyExceptionHandler
    def call(exception, locale, key, options)
      if key == "special.key"
        "translation missing!" # return this, don't raise it
      elsif exception.is_a?(MissingTranslation)
        raise exception.to_exception
      else
        raise exception
      end
    end
  end
end

I18n.exception_handler = I18n::RaiseExceptForSpecificKeyExceptionHandler.new

This would raise all exceptions the same way the default handler would, except in the case of I18n.t("special.key").

7 Translating Model Content

The I18n API described in this guide is primarily intended for translating interface strings. If you are looking to translate model content (e.g. blog posts), you will need a different solution to help with this.

Several gems can help with this:

  • Mobility: Provides support for storing translations in many formats, including translation tables, JSON columns (PostgreSQL), etc.
  • Traco: Translatable columns stored in the model table itself

8 Conclusion

At this point you should have a good overview about how I18n support in Ruby on Rails works and are ready to start translating your project.

9 Contributing to Rails I18n

I18n support in Ruby on Rails was introduced in the release 2.2 and is still evolving. The project follows the good Ruby on Rails development tradition of evolving solutions in gems and real applications first, and only then cherry-picking the best-of-breed of most widely useful features for inclusion in the core.

Thus we encourage everybody to experiment with new ideas and features in gems or other libraries and make them available to the community. (Don't forget to announce your work on our mailing list!)

If you find your own locale (language) missing from our example translations data repository for Ruby on Rails, please fork the repository, add your data, and send a pull request.

10 Resources

11 Authors

12 Footnotes

1 Or, to quote Wikipedia: "Internationalization is the process of designing a software application so that it can be adapted to various languages and regions without engineering changes. Localization is the process of adapting software for a specific region or language by adding locale-specific components and translating text."

2 Other backends might allow or require to use other formats, e.g. a GetText backend might allow to read GetText files.

3 One of these reasons is that we don't want to imply any unnecessary load for applications that do not need any I18n capabilities, so we need to keep the I18n library as simple as possible for English. Another reason is that it is virtually impossible to implement a one-fits-all solution for all problems related to I18n for all existing languages. So a solution that allows us to exchange the entire implementation easily is appropriate anyway. This also makes it much easier to experiment with custom features and extensions.

Feedback

You're encouraged to help improve the quality of this guide.

Please contribute if you see any typos or factual errors. To get started, you can read our documentation contributions section.

You may also find incomplete content or stuff that is not up to date. Please do add any missing documentation for main. Make sure to check Edge Guides first to verify if the issues are already fixed or not on the main branch. Check the Ruby on Rails Guides Guidelines for style and conventions.

If for whatever reason you spot something to fix but cannot patch it yourself, please open an issue.

And last but not least, any kind of discussion regarding Ruby on Rails documentation is very welcome on the official Ruby on Rails Forum.